PIX Raw Edge Cogged belts are available in the following categories:
The advantages of using PIX Raw Edge belts are apparent when the drive has:
The manufacturing methods also make it simpler to produce belts with cogs underside thereby reducing the bending resistance of the belts and allowing them to operate on pulleys with approximately 20% smaller diameters. The decreased bending resistance reduces mechanical losses during bending and leads to improved efficiency and reduced working temperature. Heat dissipation is further improved by the larger area between the belt and the surrounding atmosphere and also by the air turbulence around the cogs during operation. Multi stage drives can be eliminated. These belts require a higher tension than the wrapped belts so as to exhibit higher power transmission capability.
PIX Raw Edge belts offer the best solution for these conditions, using high grade components and the most advanced production machinery.
|Section||Dimensions||Angle (Deg)||Standard||Recom. Min Pulley Dia. (mm)||Manufacturing Range||Belt Length Factor (mm)|
|Top Width (mm)||Thickness (mm)||Min||Max||Length Desig.||LP to LA||LI to LP||LI to LA|
|ZX||10||6||36||IS 2494, BS 3790, ISO 4184||40||23.5"|| |
|AX||13||8||36||IS 2494, BS 3790, ISO 4185||63||23.5"|| |
|BX||17||11||36||IS 2494, BS 3790, ISO 4186||90||23.5"|| |
|CX||22||14||36||IS 2494, BS 3790, ISO 4187||140||23.5"|| |
|3VX||9.7||8.0||38||RMA IP 22||56||23.5"|| |
|5VX||15.8||14.0||38||RMA IP 22||112||23.5"|| |