logo
  • eptda
  • iso
  • Quality Policy
  • Mission Statement

Wrapped V-Belts

Wrapped V-Belt Information

PIX Power Wrapped V-Belts are available in three main categories Classical Wrapped V-Belts, Wedge V-Belts & Narrow V-Belts.

The research and development team at PIX has worked hard to achieve power ratings considerably higher than most of competing brands on the market. The compounds used at the heart of these belts are well chosen to match the designated power ratings, providing an increased margin of safety on critical drives

 

V-Belt Features

  1. "FREE SET" stringent length tolerance guaranteed
  2. Oil resistant
  3. Anti-static
  4. Belt characteristics ensure high performance in heavy-duty, continuous running applications
  5. Max belt linear speed up to 30m/sec
  6. Temperature range: -18'C to + 80'C
  7. Polycholorprene wrap for fire resistance in the event of slippage
  8. ATEX certified, FRAS belts are available on request
  9. Extensive range available from 250mm to 16789mm
  10. High performance/price ratio
  11. Manufacturing to ISO 9001 and ISO/TS 16949:2002

FRAS V-Belts

The entire PIX range of Fras industrial V-Belts exceeds international standards for oil and heat resistance, as well as anti-static properties.

However, the range is also available to certified FRAS specification (Fire Resistant Anti-Static), where extreme and hazardous conditions are encountered, such as oil rigs, mines, chemical plants etc. PIX FRAS belts are approved by PJB Mining (formerly British Coal), and also carry ATEX certification.


Standards, Dimensions & Product Range

Section Dimensions Angle (Deg) Standard Recom. Min Pulley Dia. (mm) Manufacturing Range Belt Length Factor (mm)
Top Width (mm) Thickness (mm) Min Max Length Desig. LP to LA LI to LP LI to LA
Z 10 6 40 IS 2494, BS 3790, ISO 4184 50 9.5" 176" LI 16 22 38
A 13 8 40 IS 2494, BS 3790, ISO 4184 71 13" 357" LI 20 30 50
B 17 11 40 IS 2494, BS 3790, ISO 4184 112 16" 658" LI 26 43 69
20 20 13 40 DIN 2215 1975 160 31.5" 357" LI 31 48 79
C 22 14 40 IS 2494, BS 3790, ISO 4184 180 31" 900" LI 32 56 88
25 25 16 40 DIN 2215 1975 250 57" 900" LI 39 61 100
D 32 19 40 IS 2494, BS 3790, ISO 4184 355 44.5" 900" LI 40 79 119
E 38 23 40 IS 2494 500 90" 900" LI 53 92 145
SPZ 10 8 40 BS 3790 63 365mm 4000mm LP 13 37 50
SPA 13 10 40 BS 3790 90 576mm 9110mm LP 18 45 63
SPB 17 14 40 BS 3790 140 1000mm 16824mm LP 28 60 88
SPC 22 18 40 BS 3790 224 1861mm 22943mm LP 30 83 113
FZ 10 6 40 IS 2494, BS 3790, ISO 4184 50 9.5" 176" LI 16 22 38
FA 13 8 40 IS 2494, BS 3790, ISO 4184 71 71" 357" LI 20 30 50
FB 17 11 40 IS 2494, BS 3790, ISO 4184 112 112" 658" LI 26 43 69
FC 22 14 40 IS 2494, BS 3790, ISO 4184 180 180" 900" LI 32 56 88
FSPZ 10 8 40 BS 3790 63 365mm 4000mm LP 13 37 50
FSPA 13 10 40 BS 3790 90 576mm 9110mm LP 18 45 63
FSPB 17 14 40 BS 3790 140 1000mm 16824mm LP 28 60 88
FSPC 22 18 40 BS 3790 224 1861mm 22943mm LP 30 83 113
3V 9.7 8 40 RMA IP 22 63 19.5" 160" LA 13 37 50
5V 15.8 14 40 RMA IP 22 140 47" 657" LA 25 60 85
8V 25.4 23 40 RMA IP 22 335 100" 905" LA 53 92 145