logo
  • eptda
  • iso
  • Quality Policy
  • Mission Statement

Synchronous (Timing) Belts

Synchronous Timing Belts are able to offer a fixed speed ratio, no re-tensioning after installation, and low maintenance costs. They are able to accommodate a wide variety of power transmission capacities and drive speeds.

PIX have a state-of-the-art facility where they manufacture; Classical, HTD, STD & Automotive Synchronous Belts

Classical Synchronous Timing Belts

Features :

  1. Trapezoidal tooth profile
  2. High efficiency characteristics, due to positive engagements between belt teeth and pulley grooves
  3. No re-tensioning required
  4. Maintenance free
  5. Conforms to BS 4548 standard

Designation :

Example - 270 XL 025
Where 270 : Pitch Length 27.0"
XL : Section (Tooth Pitch 5.080mm)
025 : Belt width is 0.25"

HTD Synchronous Timing Belts

Features :

  1. Modified tooth profile for improved stress distribution
  2. Reduced tooth jump due to deeper tooth design
  3. High efficiency characteristics, due to positive engagement between belt teeth and pulley grooves
  4. No re-tensioning required
  5. Maintenance free
  6. Increased power transmission capacity
  7. Conforms to ISO 13050

Designation :

Example - 800 8M 30
Where 800 : Pitch Length 800 mm
8M : Section (Tooth Pitch 8.0 mm)
30 : Belt width is 30 mm